Ignite Mini, User Manual, Page: 20 / 44

Scooterpac Ignite Mini | User Manual 20
7.5.1.3 Throttle Levers
Acceleration and deceleration are controlled by the red and green levers on the tiller. They are designed to prevent both
the forward and reverse functions from being activated at the same time.
To move forward, gently squeeze the green lever. The Ignite Mini will accelerate up to the maximum allowable speed set
by the speed controls. To slow down or stop, release the accelerator and the scooter will stop. In an emergency the
handbrake can be applied by pulling the brake handle located on the right of the handlebars.
Reverse mode can be activated by pulling the red lever when the scooter is stationary. For more information on reverse
mode please see 7.5.3 Reversing.
7.5.2 Freewheel Function
You may need to move the Ignite Mini without engaging the motor. This can be achieved by pressing and holding the
“Freewheel” button. The scooter must be switched on, with keys in the ignition and power to the main display.
Press and hold the button marked with this symbol:
Release the button to re-engage the brakes:
For your own safety, only operate this function when on a flat surface. When in freewheel mode care must be taken to
manoeuvre the scooter safely as there is no brake function.
TOP TIP – The scooter will continue to roll if pushed.