I N T E R N A L C H A N N E L S S E T T I N G S
22
MRBP.424321.001G2 Version 1.0 15/06/2020
•
«
ACTIVE 2 WIRES
»
- active 2 wires connection diagram, channel power supply connected;
•
«
PASSIVE 2 WIRES
»
- passive 2 wires connection diagram, channel power supply connect-
ed.
Notice:
If selected connection diagram doesn’t correspond to the real one,
current
loop values measurement is carried out incorrectly. Generally, the channel
switches to
«
Detector breakout
»
mode.
5.2.2
«
POSITION
»
Edited category is chosen by using the buttons
and
.
The category is changed by using the buttons
and
.
5.2.3
«
GAS TYPE
»
In the
«
GAS TYPE
»
menu it is possible to select one of 62 gas types, or, if the expected gas is
absent, set a new gas type. Gases configuration factory default settings are shown in the Appendix C.
Notice:
It is possible to edit the new gas
’
s name by selecting the gas type
“
USER New
”
and press the button
.
5.2.4
«
MEASUREMENT UNITS
»
CH1: MEASUREMENT UNITS
%LFL
%VOLUME
ppm
mg/m
3
