iglu Inuit 6I, Installation Manual

Page: 44 / 73

44
CONNECTING THE CABLES
I
GLU® Inuit 6I/ IGLU® Inuit 6WTI
RATED VOLTAGE RANGE MCA MFA
HZ Volt Min Max Min. Circuit
amps.
Max. Circuit
amps.
50 220-240 198 264 16.0A 20.0A
I
GLU® Inuit 9I/ IGLU® Inuit 9WTI
RATED VOLTAGE RANGE MCA MFA
HZ Volt Min Max
Min. Circuit
amps.
Max. Circuit
amps.
50 380-415 342 457 10.0A 16.1A
I
GLU® Inuit 12I/ IGLU® Inuit 12WTI
RATED VOLTAGE RANGE MCA MFA
HZ Volt Min Max Min. Circuit
amps.
Max. Circuit
amps.
50 380-415 342 457 10.0A 16.1A
I
GLU® Inuit 16I/ IGLU® Inuit 16WTI
RATED VOLTAGE RANGE MCA MFA
HZ Volt Min Max
Min. Circuit
amps.
Max. Circuit
amps.
50 380-415 342 457 12.0A 16.1A

The power cable is not supplied with Air to Water Heat pump.

Supply cords of parts of appliances for outdoor use shall not be lighter than polychloroprene sheathed flexible
cord (Code designation IEC:60245 IEC 57 / CENELEC: H05RN-F)

This Equipment complies with IEC 61000-3-12.

This equipment complies with IEC 61000-3-12 provided that the short-circuit power Ssc is greater than or equal to
3.3[MVA] at the interface point between the user's supply and the public system. It is the responsibility of the installer or
the user of the equipment to ensure, by consultation with a distribution network operator, if necessary, that the equipment
is connected only to a supply with a short-circuit power Ssc greater than or equal to 3.3[MVA].
SPECIFICATION OF CONNECTION CABLES (COMMON IN USE)
I
GLU® Inuit 6I/ IGLU® Inuit 6WTI
POWER SUPPLY MAX/MIN (V) COMMUNICATION CABLE
1F, 220-240 Vac, 50 Hz ±10% 0.75
̴1.5 mm
2,
, 2 Wires
I
GLU® Inuit 9I/ IGLU® Inuit 9WTI
POWER SUPPLY MAX/MIN (V) COMMUNICATION CABLE
3F, 380-415 Vac, 50 Hz ±10% 0.75
̴1.5 mm
2,
, 2 Wires
I
GLU® Inuit 12I/ IGLU® Inuit 12WTI
POWER SUPPLY MAX/MIN (V) COMMUNICATION CABLE
3F, 380-415 Vac, 50 Hz ±10% 0.75
̴1.5 mm
2,
, 2 Wires
I
GLU® Inuit 16I/ IGLU® Inuit 16WTI
POWER SUPPLY MAX/MIN (V) COMMUNICATION CABLE
3F, 380-415 Vac, 50 Hz ±10% 0.75
̴1.5 mm
2,
, 2 Wires
For Power Cable, use the grade H07RN-F or H05RN-F materials.
Power supply cords of parts of appliances for outdoor use shall
not be lighter than polychloroprene sheathed flexible cord. (Code
designation IEC:60245 IEC 57 / CENELEC: H05RN-F or IEC:60245
IEC 66 / CENELEC: H07RN-F)

When installing the outdoor unit in a computer room or network
room, server room, or in the presence of risk of disturbance to the
communication cable, use the double shielded (tape aluminum /
polyester braid + copper) cable of FROHH2R type.