REFRIGERATION LTD
12
www.igloorefrigeration.com
|
Ice Cream/ Gelato
5. MAINTENANCE
Do not use steel wool, abrasive cleaners, bleach or cleaners containing chlorine or sodium to clean the unit.
Do not use a pressure washer or water-jet to clean the unit.
The unit should be cleaned right after unpacking and before turning it on.
The unit should be cleaned with warm water and a mild soap.
Make sure to cover the fan motor to prevent moisture damage.
Door gaskets, shelves and supports should be cleaned on a regular basis.
Fan blades and guards should be cleaned with a soft moist cloth.
5.1 Cleaning and maintenance
All maintenance services need to be performed after disconnecting the
equipment from power supply!
Protect electrical components against any damage or water spillage.
Do not use water stream to clean the equipment, only a moist cloth.
Do not use any sharp objects to remove dirt!
It is recommended to make a break in the operation
once a month
in order to clean the interior, naturally defrost
the evaporator and clean the condenser.
Do not use mechanical agents to quicken the defrosting process!
A7
digital input alarm delay
0
min
0
199
A8
enable alarm “Ed” (end defrost by timeout)
0
-
0
1
Ac
set point dirty condenser alarm
60
°C
-50
250
AE
dirty condenser alarm differential temperature
3.0
°C
0.1
20
Acd
dirty condenser alarm delay
0
min
0
250
F0
enable evaporator fan control
1
-
0
1
F1
evaporator fan control set point
-2.0
°C
-50
130
F2
stop evaporator fan if compressor off
0
-
0
1
F3
evaporator fan status during defrost
1
-
0
1
Fd
post-dripping time
1
min
0
15
H0
serial address
1
-
0
207
H1
AUX output configuration
1
-
0
2
H2
enable keypad
1
-
0
2
H4
disable buzzer
0
0
1
H5
ID code (read-only)
-1
-
1
+199
EZY
restore the Default settings
0
0
0
1
