![background image](http://html1.mh-extra.com/html/igenix/ig9907/ig9907_user-manual_3926703011.webp)
11
Remote Control
On/Off button
Mode button
Sleep button
Swing button
(not available on this model)
Increase temp. button
Decrease temp. button
Fan speed button
Timer button
Unit Switch button
NOTE: This serial model has no auto swing
function. Please adjust the louvres manually
to the required position.
• Point the remote control at the receiver on the appliance.
• The remote control must be no more than 7 meters away from
the appliance (without obstacles between the remote control and
the receiver).
• The remote control must be handled with extreme care. Do not
drop it or expose it to direct sunlight or sources of heat. If the
remote control does not work, please try to take out the battery,
and put it back.
Inserting or Replacing the Batteries
• Remove the cover on the rear of the remote control
• Insert two "AAA" 1.5V batteries in the correct position (see instructions inside the battery
compartment
NOTE
• If the remote control unit is replaced or disposed of, the batteries must be removed and
discarded in accordance with current legislation as they are harmful to the environment.
• Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) batteries.
• Do not dispose of batteries in fire. Batteries may explode or leak.
• If the remote control is not be used for a certain length of time, remove the batteries
A: Horizontal louvres
B: Vertical louvres
NOTE: Certain modes and functions can only be controlled via
the remote control, therefore always ensure that the remote
control is keep in a safe place to avoid accidentally losing or
misplacing it.