Instruction Manual & User Guide
# 12958-13061-
MC-Toddler Bed with Drawer-
09-11
7
Assembling:
Toddler bed (cont)
Step 3
• Carefully fit the other end of the middle slat
and align other dowelled mattress base slats
into the opposite side, toddler bed mattress
base rail, as per Figure 3.
• Tighten both centre slat bolts.
Figure 3
Step 4
• Attach the drawer guide rail mounting block
to the headboard using 3 x 40mm allen head
bolts, as per
Figure 4.
• Repeat for the footboard.
• If you wish to change the side of the drawer.
• Remove the drawer.
• Remove both drawer guide rail blocks from the headboard and footboard,
then refit them to the opposite end of the toddler bed.
• Refit drawer as per Step 6 page 11
.
Figure 4
Tools/Hardware
required:
Tools/Hardware
required:
When fitting the drawer guide rail mounting block,
the end with the drawer guide will be on the side
the drawer will be on.
The drawer guide rail mounting block, is always
fitted with the three holes to the top.
