background image

12

                                                                                               

# 12958-13061-

MC-Toddler Bed with Drawer-

09-11

Instruction Manual & User Guide

Customer service

Please contact our Customer Service Department if you experience a problem with this product or 

require assistance: 

       

              

                                     

Product care and maintenance

• 

Always store bed indoors in a clean dry place.

• 

Do not use abrasives or detergent on bed’s surfaces.

• 

Scuff marks can be removed with mild soap and warm water. Dry with soft towel.

• 

Occasional use of furniture polish will maintain the product’s finish.

• 

Regularly check all screws and fittings to ensure that they are tight.

• 

Damaged components should be replaced as required.

• 

Replacement parts are available from the IGC Customer Service Department.

Email

Web

Phone 1

Address

Phone 2

Hours

Postal 

                      

   NEW ZEALAND

   CUSTOMERS

[email protected] 

www.igcdorel.com.au

(09) 274 1040

14 Sir William Avenue, East Tamaki,

Auckland, 2013. 

                                                                                                                      

0800 628 000 (Toll Free)

8:00 am – 4:00 pm, Monday to Friday.

IGC Dorel New Zealand Ltd

P.O. Box 82377 Highland Park

   Mt Wellington

   

New Zealand

   AUSTRALIAN

   CUSTOMERS

[email protected]                             

www.igcdorel.com.au                               

(03) 8311 5300                                        

655-685 Somerville Road                         

Sunshine West, Vic, 3020 

                  

                                                                                                                      

1300 809 526 (local call cost)

8:30 am – 4:30 pm, Monday to Friday

IGC Dorel Pty Ltd  

P.O. Box 1260

Sunshine West, Victoria, 3020

Australia

Specifications are subject to change without notice.

Copy or reproduction without permission is prohibited.

© 2011 IGC Dorel Pty Ltd. All Rights Reserved. www.igcdorel.com.au

Summary of Contents for Mother's Choice Toddler Bed with Drawer













Reviews: