79
iG5 User Manual
Connecting the iG5 to a PC or
Smartphone via Wi-Fi
The iG5 receiver has an internal Wi-Fi Access Point which can
be used in conjunction with a PC or smartphone to setup and
control every feature of the receiver including firmware
updates.
Turning the Wi-Fi ON
Wi-Fi:
IMPORTANT!
First make sure that the Wi-Fi hotspot in the iG5 is turned on.
To lengthen battery life, the Wi-Fi access point in the iG5 is
automatically powered off if it is not used for 15-minutes!
When the receiver is first turned-on Wi-Fi is enabled, then
after 15-minutes if Wi-Fi is not in use it is automatically
powered off.
Once off, click the
Files
button once, then 5-seconds later the
Wi-Fi will be powered on and accessible again.
As long as a computer or phone is connected to the iG5 Wi-Fi,
it will remain powered on.
Connecting to the Wi-Fi
Connect a computer to the iG5 receiver using Wi-Fi.
Device Wi-Fi Overview:
SSID:
GNSS-#######
device-serial-number
Wi-Fi Key:
12345678
the Wi-Fi Password
Address:
192.168.1.1
port:
80
User Name:
admin
lower case
password:
password
lower case
To connect the iG5 to your PC with Wi-Fi:
Click on the Network icon in the System Tray
