23
iG5 User Manual
just ignore it.
The first time you attach a receiver, you may need to wait for
a few minutes for standard device drivers to be downloaded /
installed.
Since the drive connects as a standard USB thumbdrive the
drivers are built into Windows XP, Windows Vista, Windows
7, Windows 8 and Windows 10.
If your iG5 receiver does not mount or an error message is
displayed, you can usually unplug the receiver, wait a
moment, then plug it back in.
If you continue to have problems check the
‘Troubleshooting…’ section at the end of this manual
.
Starting the iGx Download Tool
You can start the iGx download tool by clicking on the iGx
shortcut on your desktop:
Downloading Data
Assuming the iG5 receiver is plugged in and has mounted (as
a lettered drive) just press:
The program will automatically switch to the '_New' project
and download every new file from your receiver. As files are
downloaded, they are marked on the receiver as
‘Downloaded’ however they are not deleted from the
receiver and may be manually downloaded again at a later
time if needed.
