iG5 User Manual
18
When the receiver turns on, all four LED’s will light for ½
second.
Files Pushbutton
iG5 receivers are factory configured to automatically begin
recording after the receiver is turned on and tracking
satellites. (You probably w
on’t
ever need to use the Files
button.)
If the receiver is recording data, pressing and holding the Files
button on the left-hand-side for 10-seconds toggles the
receiver from collecting data, to not collecting data and
closes the current occupation file. The
yellow
Files LED will
stop flashing when recording stops.
When the receiver is not recording, pressing and holding the
record button for 10-seconds will open a new observation file
and begin collecting observation data.
LED Indicators
There are four LED indicators on the receiver:
Power (
)
Red
Power is ON. External power is not
connected.
Amber
The internal battery is charging.
Green
Internal battery is fully charged.
SV’s (
Satellite Count)
Blue
Blinks once for each tracked satellite,
waits 5-seconds, repeats. If no satellites are
tracked, will blink once every 5-seconds.
Serial
Amber
Blinks amber when the receiver is not fixed
and correction data received.
