SmartPLC DataLine with EtherNet/IP device interface
65
>
Show target visualisation
41662
Using the CODESYS programming system, the user can optionally program a target visualisation to
create an application-specific user interface for the display of AC1423/24. The target visualisation is
loaded onto the device together with the CODESYS project, but it must be activated manually.
If no valid target visualisation is stored on the device, a green screen appears after activating
the [Activate Target-Visu] button
To exit the target visualisation and return to the menu page:
► Press [
] and [
] simultaneously.
If the device does not react when entering [
] + [
], the key combination is deactivated.
► Activate the key combination using the system command "Show target visualisation"
(
→ Device Manual Supplement,
Command 0x0110 – Display target visualisation
)!
To activate the target visualisation:
1 Select menu page
►
>
>
►
Select the [Activate TargetVisu] tab.
2 Start the target visualisation
►
Press [Activate Target-Visu] button.
>
The confirmation message appears.
►
Press [OK] button to confirm the message.
>
The display shows the target visualisation.
