SmartPLC DataLine with EtherNet/IP device interface
52
>
5.4.2
AS-i 1 / AS-i 2: Diagnosis
41538
The [Diagnosis] menu provides access to the diagnostic data of the selected AS-i network.
>
Display and reset the error counters
41445
To display and reset the AS-i error counters:
1 Select the menu page
►
>
or
>
►
Select [Error counters] tab.
2 Display the error counters
>
Page shows the following information:
Name
Description
[Telegrams]
Number of message errors that occurred
[Configuration]
Number of configuration errors that occurred
[Voltage < 22.5V]
Number of voltage errors < 22.5 V
[Voltage < 19.0V]
Number of voltage errors < 19.0 V
[Earth fault]
Number of detected earth faults
3 Optional: reset the error counters
►
Press [Reset] button.
>
All error counters are reset to
0
.
>
Display the error statistics of the AS-i slaves
41437
To display the error messages of the AS-i slaves on the selected AS-i master:
1 Select the menu page
►
>
or
>
►
Select [Errors / slave] tab.
2 Display the error statistics of the AS-i slaves
>
Page shows the following information:
Column header
Description
[Address]
Address of the AS-i slave
[S/A]
Number of errors of the single or A slave at this address
[B]
Number of errors of the B slave at this address
►
Use [
] / [
] to scroll through the table.
