IFM SBY2 Series, Operating Instructions Manual, Page: 25 / 28

Mechatronic flow sensor SBY2xx SBG2xx SBN2xx
25
11 Operation
11.1 Process value display
It is possible to switch between different process value indications during operation:
u
Press [▲] or [▼].
w
The display changes between the standard indication with set standard unit of measurement and
other views.
w
After 30 s, the unit returns to the standard display.
1 2
Fig. 21: Process value display
1: Standard display as set under [SELd] and [uni].
Example: [SELd] = FLOW and [uni] = m
3
/h
2: Further view. The LED indicates in which unit the current process value is displayed.
Example: temperature in °C.
11.2 Reading the parameter setting
u
Briefly press [●].
u Press [▼] to select the parameter.
u Briefly press [●].
w
The currently set value is displayed for 30 s. Then the unit returns to the process value display.
GB