SBY2xx SBG2xx SBN2xx
Mechatronic flow sensor
10
4.5.1 Volumetric flow monitoring
FOU = OFF 0
2
1
3
4
5
FOU = ON 130
120
100
Err
= FrP1
MAW
FEP1
MEW
OL
100 120 130 [% MEW]
[% FrP1]
Fig. 5: Output characteristic frequency output, flow rate
1:
Frequency signal
MAW:
Initial value of the measuring range
2:
Flow
MEW:
Final value of the measuring range
3:
Display range
FEP1:
Frequency end point
4:
Measuring range
FRP1
Frequency signal (Hz) for upper measured value
5:
Scaled measuring range
OL:
Above the display range
Err:
Error
4.5.2 Temperature monitoring
FOU = OFF 0
2
1
3
4
5
FOU = ON 130
120
100
UL
Err
Err
= FrP1
MAW
FSP1
FEP1
MEW
OL
100 120
[% MEW]
[% FrP1]
Fig. 6: Output characteristics frequency output, temperature
1:
Frequency signal
FSP1:
Frequency start point
2:
Temperature
FEP1:
Frequency end point
3:
Display range
FRP1
Frequency signal (Hz) for upper measured value
4:
Measuring range
MAW:
Initial value of the measuring range
5:
Scaled measuring range
MEW:
Final value of the measuring range
Err:
Error
OL:
Above the display range
4.6 Display colour setting
The colour of the characters in the display can be set via the parameter [coLr]. With the set
parameters rED (red) and GrEn (green), the display is permanently set to one colour. If the
parameters rxou and Gxou are set, the colour of the characters changes depending on the process
value:
OUT1
OUT2
Colour change to…
Parameter setting
r1ou
r2ou
Red
G1ou
G2ou
Green
When the hysteresis function is set, the colour changes if the process value is above the set point:
