SB1xxx SB2xxx SB3xxx SB4xxx SB5xxx SB6xxx SB7xxx SB8xxx SB9xxx SB03xx
Mechatronic flow
sensor
14
9 Set-up
After power on and expiry of the power-on delay time, the unit is in the normal operating mode. It
carries out its measurement and evaluation functions and generates output signals according to the
set parameters.
During the power-on delay time the outputs are switched as programmed:
•
OFF with normally open function (Hno / Fno)
•
OFF with normally closed function (Hnc / Fnc)
•
OFF for frequency output (FRQ)
•
0 mA for current output (I)
