IFM PDM360NG Series System Manual Download Page 30

Page: 30 / 463

ifm

System Manual

ecomat

mobile

PDM360NG (CR1080, CR1081, CR9042) Target V01

2011-07-28

Configurations

Set device parameters (setup)

Setup: set the CAN interfaces

7413

►

Select the menu item [CAN] in the menu [System Settings].

The menu [CAN Bus Selection]
appears.

►

Select the requested CAN bus

with [SELECT] and confirm with
[ENTER].

The menu [Bus Settings] of the
selected CAN bus appears.

►

Change to the menu [CAN Bus

Settings Baudrate] with [Baudrate
CAN Bus].

The menu [CAN Bus Settings
Baudrate] appears.

►

Increment or decrement the CAN

baud rate with [UP] or [DOWN].
Only the allowed values are
available.

►

Confirm and save the changed

value with [SAVE].

►

Return to the requested setup

menu by pressing [EXIT] several
times.

Summary of Contents for PDM360NG Series
















































































































































































































































































































































































































































































Search results

Summary of Contents for PDM360NG Series

Reviews:

Brands by name

Popular brands

IFM PDM360NG Series, System Manual

Search results

Summary of Contents for PDM360NG Series

Reviews:

Brands by name

Popular brands