manualshive.com logo in svg

IFM PDM360NG Series, System Manual

Share
Download
IFM PDM360NG Series System Manual Download Page 171

ifm

 System Manual 

ecomat

mobile

 PDM360NG (CR1080, CR1081, CR9042) Target V01 

2011-07-28 

CAN in the PDM360

 

Exchange of CAN data

 

 

171 

 

POU inputs 

8353 

Almost all POUs have an ENABLE or EXECUTE input. 

  The ENABLE input relates to the level. As long as it is set or remains set, the POU will be 

executed and "counted" before or/and after the IEC task, i.e. filled with data. 

  An EXECUTE input is edge triggered. The POU is ONLY executed once upon transition of the 

input from 0 to 1.  

Via the input CHANNEL, the CAN channel is selected. 

If in the lists the addition "(optional use of the parameter)" appears for an input parameter, the 
application programmer can leave out the assignment of this input. In this case the function works with 
the assignment that was preset for this input. All inputs that are not declared in this way must be 
assigned. 

 

Summary of Contents for PDM360NG Series
















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands