7
UK
7 IO-Link
7.1 General information
This unit has an IO-Link communication interface which requires an IO-Link-
capable module (IO-Link master) for operation�
The IO-Link interface enables direct access to the sensor values and parameters
and provides the possibility to set the parameters of the unit during operation�
In addition communication is possible via a point-to-point connection with a USB
adapter cable�
You will find more detailed information about IO-Link at www�ifm�com�
7.2 Device-specific information
You will find the IODDs necessary for the configuration of the IO-Link unit and
detailed information about sensor values, diagnostic information and parameters
in the overview table at www�ifm�com�
7.3 Parameter setting tools
You will find all necessary information about the required IO-Link hardware and
8 Maintenance, repair and disposal
Faulty sensors must only be repaired by the manufacturer�
►
Keep the front lens of the sensor free from soiling�
►
After use dispose of the unit in an environmentally friendly way in accordance
with the applicable national regulations�
►
Do not try to open the module enclosure� There are no user-serviceable
components inside�
Technical data and further information at www�ifm�com
