Photoelectric distance sensor
OGD25x OGD55x
29
u
Select [tFx] for distance or [tdx] for reflectivity.
w
The parameter value for [FSPx] / [dSPx] is displayed.
u
Keep [▲] or [▼] pressed for at least 3 s.
w
The current measured value is displayed. The measured value depends on the current situation.
u
Confirm by clicking on [●].
w
The new measured value flashes once.
w
The taught values are stored in [nSPx] / [FSPx] or [bSPx] / [dSPx].
11.2.4.2 Teaching via IO-Link
u
Call up [Parameter] > [Output configuration].
u
Select the output function [Fno] or [Fnc] under [OU1] / [OU2].
u
Select the measured parameter under [SEL1] / [SEL2].
u
Call up [Parameter] > [Digital output 1 ] / [Digital output 2].
u
Select [Distance] / [Reflectivity].
u
Click on [Teach tnx] / [Teach tbx].
w
The measured value for “far” / “bright” is taught.
u
Click on [Teach tFx] / [Teach tdx].
w
The taught value is stored in [nSPx] / [FSPx] or [bSPx] / [dSPx].
11.2.5 Teach – 1-point window function
The device offers the possibility to teach in a window with a predefined window width via the teach
function. For this purpose, the window to be taught in must be in the sensor’s detection range. When
the teach-in process is completed, the currently measured values are stored in [nSPx] / [FSPx] for
distance or [bSPx] / [dSPx] for reflectivity. The window width is defined using the parameter [SFx].
[nSPx] ⁄ [bSPx]
[FSPx] ⁄ [dSPx]
[Fnc]
3
3
2
1
1
Window width [SFx]
[nSPx] / [bSPx]:
Switch point “near” / “bright”
2
Object
[FSPx] / [dSPx]:
Switch point “far” / “dark”
3
Resulting switch points
11.2.5.1 Teaching via the device keys
u
Change to menu level 1.
u
Select [OU1] / [OU2].
u
Confirm by clicking on [●].
w
Set parameter value is displayed.
u
Keep [▲] or [▼] pressed for at least 3 s.
