OGD25x OGD55x
Photoelectric distance sensor
18
7 Operating and display elements
2
3
4
5
6
7
8
9
1
mm
refl
pwr
1:
2x green LED
Status LED = set display unit (cm, mm, refl)
2:
1x green LED
Status LED = power
3:
1x yellow LED
Switching status [OUT1]
4:
1x yellow LED
Switching status [OUT2]
5:
1x red LED
Status LED = display of faults
6:
Programming button [●]
Selection of the parameters and acknowledgement of the param-
eter values.
7:
Programming button [▲]
Setting of the parameter values (scrolling by holding pressed,
incrementally by pressing once).
8:
Programming button [▼]
Setting of the parameter values (scrolling by holding pressed, in-
crementally by pressing once).
9:
4-digit alphanumeric display
Indication of the measured distance or reflectivity, the parame-
ters and parameter values.
