7
UK
6 Settings
6.1 Automatic setting of the sensitivity
6.1.1 The sensor is to switch when the object is detected
Diffuse reflection optics (FT-50)
1
►
Position the object�
►
Press [OUT on] for > 2 s to < 6 s�
> The sensitivity is set to the object�
> The green LED lights, the yellow LED flashes 2 x�
2
►
Remove the object�
►
Press [OUT off]�
> The sensitivity is set without object�
> The green LED lights, the yellow LED indicates the switching status�
> The programming is finished�
Through-beam optics (FE-50)
1
►
Position the object�
transmitter
receiver
►
Press [OUT on] for > 2 s to < 6 s�
> The sensitivity is set to the object�
> The green LED lights, the yellow LED flashes 2 x�