14
7.4 Connect O3X1xx to ifm Vision Assistant
7.4.1 Required Ports
To connect the ifm Vision Assistant, the following ports must be enabled:
• UDP: 3321
• TCP: 50010
• TCP / HTTP: 80 and 8080
Firewalls and routers available in the network must enable the ports for the
ifm Vision Assistant�
7.4.2 Hardware
►
Connect device to the voltage supply�
►
Connect device to the Ethernet interface of the PC using the Ethernet cable�
1
2
3
4
(1): Power supply
24 V
(2): Device
(3): Ethernet cable
(4): PC
7.4.3 Connect device automatically
1�
Start the "ifmVisionAssistant" application.
2� Click on
�
> The ifm Vision Assistant searches for connected devices via Ethernet�
> All devices found are shown in a list for selection�
3� Click on the button of the device found�
> Connecting to device�
If ifm Vision Assistant does not find a device:
► Check hardware connection and current supply (→ "7.4.2 Hardware").
►
For troubleshooting connect the Ethernet cable of the device directly to
the PC�
► Connect device manually (→ "7.4.4 Connect device manually").