9
ifm Vision Assistant 3D camera O3X1xx
UK
4.1 Find sensor
With this function, it is possible to search for the connected devices or to establish a manual connection
with a connected device .
►
Ensure that the device and the PC are ready for operation and that there is an Ethernet connection .
> Without Ethernet connection, the functions of the device cannot be accessed .
The following ports must be open (if necessary, adjust the settings of the firewall):
●
UDP: 3321
●
TCP / HTTP: 80 and 8080
●
TCP: 50010
The device can only be accessed with one PC at a time . Access with several end devices (e .g . PC)
is not supported .
4.1.1 Connect device automatically
►
Click on
.
> The ifm Vision Assistant searches for connected devices via Ethernet .
> All devices found are shown in a list for selection .
►
Click on the button of the found device in order to establish connection .
If the ifm Vision Assistant does not find a device automatically:
●
Check if the device is correctly connected and ready for operation and click on [Search
completed] to start a new search .
●
Connect the device directly with the PC without any additional network devices in the
connection (e .g . router) .
●
Click on [Manual connection] and enter the IP address of the device manually