3D camera O3X1xx
4
1. Preliminary note
This document describes the software interfaces of the O3X1xx 3D camera.
1.1 Symbols used
►
Instructions
>
Reaction, result
[…] Designation of keys and buttons
"…" Name of display text
→
Cross-reference
Important note
Non-compliance may result in malfunction or interference.
Information
Supplementary note
1.2 Safety instructions
Please read the operating instructions prior to set-up of the device. Ensure that the device is suitable for
your application without any restrictions.
If the operating instructions or the technical data are not adhered to, personal injury and damage to
property can occur.
1.3 Further documents
●
Operating instructions
●
Interface description
The documents can be downloaded at:
www.ifm.com
2. System requirements
2.1 Software
Windows 7 (32/64 bit), Windows 8.1 (32/64 bit), Windows 10 (32/64 bit)
2.2 Hardware and accessories
Hardware:
– Camera of the O3X1xx product family
– PC with x86 or x64 type processor
– Screen: min. 1024 x 768 pixels, 32 bit colour depth
– Ethernet interface
The Ethernet interface can be retrofitted with an USB-to-Ethernet adapter.
Accessories:
– Power supply 24 V, 1.6 A, min. peak current 2.4 A
You will find further information about available accessories at:
www.ifm.com