7
ifm Vision Assistant O3M
UK
2 System requirements
2.1 Software
The following software versions are required for operation:
●
Operating system: Windows 7 (32/64 bits), Windows 8 .1 (32/64 bits), Windows 10 (32/64 bits)
●
Application software: ifm Vision Assistant 1 .8 .9 .0
●
Firmware DI: 4 .21 .x
●
Firmware OD: 4 .21 .x
●
Firmware LG: 4 .21 .x
The required software can be found at
www .ifm .com
.
Other versions of the ifm Vision Assistant may contain changed or new functions which are not
described in this software manual .
2.2 Hardware and accessories
The following hardware is required for operation:
●
Sensor of the O3M family
●
PC with x86 or x64 type processor
●
Screen: min . 1024 x 768 pixels, 32-bit colour depth
The following accessories are required for operation:
●
Cable for network connection (Ethernet) for parameter setting, M12 connector/RJ45 connector, 4
poles, e .g . article no . E11898 (2 m), E12283 (5 m)
●
Illumination unit
●
Article no . O3M950 for O3M15x and O3M25x
●
Article no . O3M960 for O3M16x and O3M26x
●
MCI connection cable between sensor and illumination unit, article no . E3M121, E3M122 or E3M123
●
Power supply cable for the illumination unit, article no . E3M131, E3M132 or E3M133
●
Sensor cable for CAN bus and power supply, article no . E11596, E11597 or
EVC492 (EVC492 incl . terminating resistor)
●
CAN USB interface "CANfox", article no . EC2112
●
CANfox adapter cable, article no . EC2114
●
Power supply 24 V, minimum 2 .4 A, e .g . article no . DN4012
You will find further information about available accessories at
www .ifm .com
.
