Object recognition sensor
O2D54x O2D55x
21
9 Set-up
Error during set-up
w
The unit may cause errors if it is put into operation below 0 °C.
u
Put the unit into operation above 0 °C.
w
After being put into operation, the unit can be used below 0 °C. The possible ambient
temperatures are specified in the data sheet.
After power on, the unit is put into operation.
After approx. 30 seconds, the unit is in the evaluation mode where saved applications are executed.
The indicators signal the current operating status.
On delivery, no applications are set up and the unit does not perform any function.
u
Configure the unit via the ifm Vision Assistant software.
