IFM O1D111, Operating Instructions Manual

Page: 11 / 23

Photoelectric distance sensor O1D111
11
8 Menu
8.1 Menu structure
= [MODE ⁄ ENTER] = [SET]
8.2 Explanation of the menu
Parameter Explanation
[OU1] Configuration for output 1
4 switching functions can be selected:
[Hno], [Hnc], [Fno], [Fnc]
Configure OUT1 ( Ò / 15)
[SP1] Switch point for hysteresis function OUT1
Limit value at which the output with selected hysteresis function changes its switching state (object near-
er/farther than distance set).
[SP1] is only active if [OU1] = [Hno] or [Hnc].
Setting of the switch point for hysteresis function OUT1 (
Ò /
16)
[nSP1]
[FSP1] Switch points for window function OUT1
Values at which the output with selected window function changes its switching state (object present /
not present between the distance "near" and the distance "far").
[nSP1] = switch point "near" / [FSP1] = switch point "far".
[nSP1] / [FSP1] are only active if [OU1] = [Fno] or [Fnc].
Setting of the switch points for window function OUT1 ( Ò / 17)