O1D110
Photoelectric distance sensor
10
7 Operating and display elements
2
3
4
5
1
1:
4x green LED
Lighting LED = power and set display unit (mm, m)
2:
4x yellow LED
Indication of the switching status; Is on if the corresponding output is
switched.
3:
4-digit alphanumeric display
Indication of the measured distance, the parameters and parameter values.
4:
Programming button
[SET]
Setting of the parameter values (scrolling by holding pressed, incrementally
by pressing once).
5:
Programming button
[MODE/ENTER]
Selection of the parameters and acknowledgement of the parameter values
