IFM MK59 Series, Operating Instructions Manual

Page: 33 / 33

Cylinder sensor with IO-Link MK59xx
33
13 Factory settings
Parameter Factory setting User settings
TI Select SSC1.1
SSC1.1 Param. SP1 1800
SSC1.1 Param. SP2
1)
2200
SSC1.1 Config. Logic High active
SSC1.1 Config. Mode Window
SSC1.1 Config. Hyst
1)
100
SSC1.1 Switch-On delay 0 ms
SSC1.1 Switch-Off delay 0 ms
SSC1.2 Param. SP1 1900
SSC1.2 Param. SP2
1)
2100
SSC1.2 Config. Logic High active
SSC1.2 Config. Mode Window
SSC1.2 Config. Hyst
1)
100
SSC1.2 Switch-On delay 0 ms
SSC1.2 Switch-Off delay 0 ms
Output configuration ou1 SSC1.1
Diagnostic output dFU1
3)
Overflow SCT1.1
Output configuration ou2 2) SSC1.2
Diagnostic output dFU2
3) 2)
Overflow SCT1.2
SSC-EnhCtr_AutoReload. SSC1.x OFF
SSC-EnhCtr_HoldTime. SSC1.x 10000 ms
SSC-EnhCtr_Threshold.SSC1.x 0
SSC-EnhCtr_CountCondition.SSC1.x Rising
Signal direction Not inverted
Actuator reference runtime 1 --> 2 0 ms
Actuator runtime tolerance 1 --> 2 Deactivated
Actuator reference runtime 2 --> 1 0 ms
Actuator runtime tolerance 2 --> 1 0 ms
1)
The parameter will only be displayed if other parameters have been set accordingly beforehand.
2)
The parameter is only available for devices with 2 outputs ( Ò Function / 7) .
3)
The parameter will be displayed, but the setting will only take effect if [oux] = [dOU] has been selected.