29
UK
Adjustment [cOP] of the overflow prevention OP necessary.
[Loc]
Unit locked via buttons; parameter setting is not possible. For
unlocking press the two setting buttons for 10 s.
[uLoc]
Unit is unlocked / parameter setting is possible again.
[C.Loc]
The unit is temporarily locked. Parameter setting via IO-Link is
active (temporary locking).
[S.Loc]
Unit is permanently locked via software. This locking can only
be removed with a parameter setting software.
12.2 Read set parameters
►
Briefly press [Mode/Enter] (if required, repeat several times).
> Menu structure is scrolled until the required parameter has been reached.
►
Briefly press [Set].
> Respective parameter value is displayed for 30 s.
