15
UK
6 Installation
If the sensor is installed in a metal tank with a non-metal window, the following
installation conditions are to be noted in order to ensure correct operation:
20
20
35
20
20
Fig� 5: Installation distances to metal objects
If the device is installed with the cable facing upwards, the parameter
[Orientation] must be set to "Connector on top"
�
►
Lay the connection cable as straight as possible and do not coil it�
If you do not adhere to the installation conditions, you do so at your own
risk� If the conditions to ensure sufficient grounding are not adhered to, the
conductive surface must be parallel to the sensing face�
