UK
29
1) If activated, the termination resistor is only enabled while the device is powered�
The termination resistor is deactivated per default�
9.24 Object 3005h - Auto BootUp Enable
With this object, the start-up behaviour of the encoder is defined�
Sub-index
Meaning
Data type
Default value
Access
0
Auto BootUp
Unsigned 8
0
rw
True: After power up, the encoder enters the operational state autonomously wit-
hout receiving an NMT start command�
False: After power up, the encoder enters the pre-operational state� This is the
standard behaviour of CANopen devices�