Operating instructions FX460
38
10000
Default value
+99999999
Highest possible final value
ANALOG GAIN (%)
With this parameter, the maximum gain can be set� The analogue gain indicates the maximum gain of the
analogue output in % referred to +/- 10 V or 20 mA�
Examples:
●
101�00 corresponds to a gain of 10�2 V / 20 mA after reaching the "Analog End“ value�
●
95�00 corresponds to a gain of 9�5 V / 18 mA after reaching the "Analog End“ value�
0�00
Lowest possible gain
100�00
Default value
110�00
Highest possible gain
ANALOG OFFSET (%)
With this parameter, the zero point shift of the output can be set�
Example: 0�20 corresponds to a gain of 0�2 V / 0�4 mA after reaching the "Analog Start“ value�
-99�99
Lowest possible zero point shift
0
Default value
+99�00
Highest possible zero point shift
9.14 Command menu
INPUT 1 ACTION
This parameter defines the control function of the Ctrl� In 1 input�
d = dynamic switching characteristics (edge evaluation), INPUT CONFIG must be set to RISING/
FALLING EDGE
s = static switching characteristics (level evaluation), INPUT CONFIG must be set to ACTIVE LOW/
HIGH
NO
No function
SET / RESET VALUE
TIMER operating mode: set / reset to the value of SET VALUE
COUNTER operating mode: set / reset of the value of channel A
and B to the value of SET VALUE
VELOCITY operating mode: reset to 0
d, s
FREEZE
Freezes the display value
s
KEY LOCK
Locks the keys of the touch screen
s
LOCK RELEASE
Release latching of all outputs
d
RESET MIN/MAX
Reset of the min� / max� values
d, s
SERIAL PRINT
N�A�
d
TEACH PRESEL 1
Current display value is stored as PRESELECTION 1�
d
TEACH PRESEL 2
Current display value is stored as PRESELECTION 2�
d
TEACH PRESEL 3
Current display value is stored as PRESELECTION 3�
d
TEACH PRESEL 4
Current display value is stored as PRESELECTION 4�
d
