UK
Process and dialogue module ecomatDisplay CR1074, CR1075, CR1076, CR1077
15
4.4 Surface mounting with RAM
®
mount system
Using the RAM
®
mount set, available as accessories, the device can be used as a
firmly mounted desktop unit� Two ball heads allow variable orientation of the unit�
RAM
®
mount components
1: Mounting arm with fastening screw
2: Mounting plate with ball head
Dialogue module with mounted RAM
®
mount system
You will find more information about the available RAM
®
mount components at:
www�ifm�com
4.4.1 Mounting steps
►
Screw the mounting plate to the back of the device�
Usable M5 thread depth: ≤ 8 mm
Tightening torque M5: 5
±0�5
Nm
►
Screw second mounting plate / ball head of the selected RAM
®
mount
component on suitable surface according to RAM
®
mount indications�
38 (1,5")
56
62
6
38,1
30
5,3
Mounting plate with ball head
Hole dimensions
Tightening torque: 5
±0�5
Nm
►
Slightly loosen the fastening screw of the mounting arm�
►
Place the mounting arm onto the ball heads and tighten the fastening screw�
