UK
Process and dialogue module ecomatDisplay CR1058, CR1059
13
4.3.4 Mounting steps
►
Screw the set screws into the M5 threads on the back of the device�
Locator for mounting accessories)
►
Attach damping strip to the device�
Damping strip
►
Insert the device into the cut-out�
►
Insert the spacer suitable for the panel thickness.
The thickness of the spacers corresponds to the panel thickness. If necessary,
use several spacers on top of each other.
►
Screw the fixing profile to the back of the device.
Tightening torque of the hexagon nuts: 5
±0.5
Nm
NOTE!
Contact corrosion between the mounting screws and the housing�
> Damage to the device
►
Do not use copper or nickel-plated materials for the bolting
elements�
►
Use zinc-plated screws�
►
In very corrosive environments such as extremely salty air, use
screws with surface finishing on a zinc/nickel basis with thick-film
passivation and sealing�