UK
Operating instructions
(Ex protection related part) for M12 connectors
according to EU directive 2014/34/EU annex VIII (ATEX)
group II, equipment group 3G/2D
EVCXXA
7061
10 / 01
05 / 2017
Page 1: ...UK Operating instructions Ex protection related part for M12 connectors according to EU directive 2014 34 EU annex VIII ATEX group II equipment group 3G 2D EVCXXA 706110 01 05 2017 ...
Page 2: ...th angled M12 plug and angled M12 sockets Installation Set up The M12 connectors must only be installed connected and set up by qualified staff The qualified staff must have knowledge of protection classes regulations and provisions for apparatus in hazardous areas Check whether the classification see Marking above and marking on the M12 conncector is suitable for the application Installation rema...
Page 3: ... 1 2 Nm to 1 5 Nm This tightening torque is ensured as follows Hand fasten the coupling nut 0 4 to 0 5 Nm Then turn by 3 notches using a screwdriver across the flats 14 The connector conforms to the requirements for an M12 connector in EN 61076 2 101 The counterpart must also conform to this standard Always refer to the operating instructions as space restrictions may not allow markings to be appl...