IO-Link master
36
Access is only with read permission and exclusively via slot 1 and subslot 1 (status/control module)�
18 Set-up
18.1 On delivery/default settings
On delivery, the following functions and features are available:
IP settings
● ProfiNet name: no name assigned
● IP parameters: 0�0�0�0
● Subnet mask: 0�0�0�0
● Default gateway: 0�0�0�0
● Device designation: AL1000
● Device ID: 0104
hex
Firmware update
● Firmware update on next restart: deactivated
● TFTP server IP address: 192�168�210�211
● Firmware file name: FIRMWARE�NXF
System identification
● Device name: no name assigned
● Description: no description assigned
● Device location: no location assigned
● Contact: no contact assigned
Web-based Management (WBM)
● User name: admin
● Password: private
18.2 Restoring the default settings
The default settings can be restored via WBM� To do this, go to the web site
Administration > Default settings and follow the instructions�
18.3 Start of firmware
Once you have connected power, the firmware is started� After completion of the
firmware boot process, the green NET LED lights or flashes�
