190
ifm
Device Manual SmartSPS AC14 with EtherNet/IP interface (AC1421, AC1422), Firmware 3.1.2
2015-11-30
Appendix
Fieldbus EtherNet/IP
>
Slot 10 – Analogue input data
124390
Slot
Description
Value range
Length
[words]
10
Data area with a maximum
length of 60 words for cyclic
transmission of analogue
input information
Default setting: analogue
inputs of AS-i slaves 01.. 15,
connected to AS-i master 2
(only available for devices
with 2 AS-i masters)
The
valid
and
overflow
flags that each
analogue AS-i input slave
provides for each channel
are NOT represented here.
If required, they can be read
out via the acyclic services
(Explicit Messaging)
(
→
The acyclic process data
).
Empty module = Module is deactivated
0
004 words = Module is activated with 4 analog channels
4
008 words = Module is activated with 8 analog channels
8
012 words = Module is activated with 12 analog channels
12
016 words = Module is activated with 16 analog channels
16
020 words = Module is activated with 20 analog channels
20
024 words = Module is activated with 24 analog channels
24
028 words = Module is activated with 28 analog channels
28
032 words = Module is activated with 32 analog channels
32
036 words = Module is activated with 36 analog channels
36
040 words =Module is activated with 40 analog channels
40
044 words = Module is activated with 44 analog channels
44
048 words = Module is activated with 48 analog channels
48
052 words = Module is activated with 52 analog channels
52
056 words = Module is activated with 56 analog channels
56
060 words = Module is activated with 60 analog channels
60
The exact mapping of analogue input data within this area depends on the parameter setting [Analog.
channels/I-slave] (
→
Configuration of the analogue channels in slots 9 ... 12
(
