IFM Ecomat 300 AC1375, Device Manual

Page: 425 / 523

ifm Device manual AS-i M4 Gateway Profibus DPV1 (AC1375, AC1376) 2012-02-23
Operation Display of slave with peripheral fault
425
14.5 Display of slave with peripheral fault
5951
Display at which slave address the device has detected a slave type A, B or S (standard) with a wiring
fault (periphery) on the bus.

also chapter Display of the list of slaves with peripheral fault (LPF) ( → page 422 ).
In case of a configuration error or failure the start screen of the text/graphics display will provide
information as shown in the following screen:
E26 ASi1
Generic peripheral fault
MENU
1/2
!
USER
Step 1:
Display of an error when the start screen was active:
> The display on the left appears instead of the
ifm
start screen:
Peripheral fault on AS-i master 1:
 E26 = fault number,

chapter Troubleshooting ( → page 479 ).
 ASi1 = concerned AS-i master channel number.

Generic peripheral fault: There is a peripheral fault.
 1/2: First page of 2 with troubleshooting.
 Flashing "
!
": There is an error message.
> LED [CONF/PF] flashes.
► Press [ ] to scroll to the next error screen.
.
E13 ASi1 Slv.20
Peripheral fault detected
MENU
2/2
!
USER
Step 2:
Display of the fault details:
> Slave 20 on AS-i master 1 signals peripheral fault.
> LED [CONF/PF] flashes.
► Press [ ] to return to the start screen.
OR (if further faults exist):
Press [ ] to scroll to the next error screen.