IFM Ecomat 300 AC1307, Basic Device Manual

Page: 90 / 219

10BSet-up
59BPassword protection
11-22
11.4 Password protection
General
In the menu "System Setup" the operation can be restricted or enabled in the item
"password". On delivery, the unit is in the user mode (= password level 1). By en-
tering an arbitrary invalid password (e.g. 1000) all menu items that allow settings to
be changed will be blocked. This blocking is the password level 0 (end user mode).
CAUTION
Access to controllere menus by unauthorised users
Risk for persons and plant/machine by access of unauthorised users to special
menus of the controllere.
► Change the password to the level 0 again as soon as the work in a higher
password level has been completed.
→
page 11-23 "Password setting"
Password levels
Password level Operating mode Password Note
0 end user mode any
1 user mode CE01 factory setting
2 service mode E02C
Main menu 2nd menu level
Required pass-
word level
Quick Setup all 1
PLC Setup all 1
Address Slave all 1
Diagnostics Reset Error Counter 1
Master Setup Config all 1
Master Setup Operating mode 1
Master Setup Autoaddr. mode 1
Master Setup Slave Reset 1
Fieldbus Setup all 1
System Setup Modbus Setup 1
System Setup Firmware update 3 *)
System Setup Factory default 3 *)
System Setup System Specials 2
System Info Admin Info 3 *)
Slave Setup all 2
All other menus all 0
*) Please contact your AS-i sales specialist if you want to work with the password
level 3.
The set password is immediately valid when entered and remains effective until the
setting is changed.