7BOperating and display elements
37BDiagnostic LEDs
8-1
8
Operating and display elements
In this chapter you will learn more about the elements on the controllere:
•
how to operate the unit
•
how to obtain information about the unit and its configuration
•
how to set parameters for the unit and the AS-i slaves.
8.1
Diagnostic LEDs
The three diagnostic LEDs on the controllere inform about the status of the AS-i
master and the connected systems:
Figure: diagnostic LEDs
Comment on the figure "diagnostic LEDs":
•
The LEDs [
ASI2
] are an option for the second AS-i master, including the label-
ling
•
The LED [
ETH NET
] is, including its labelling, an option for the Ethernet pro-
gramming interface
Two designations for one LED, separated by a slash "/", signify:
•
the first designation describes the status in case of a permanently lit LED
(mostly normal operation) and
•
the second designation describes the status in case of a flashing LED
(mostly in case of a fault).
