6
5 Set-up
►
Connect the interface to the sensor and to a USB 2�0 port of the PC�
> After the initialisation time of approx� 5 seconds the interface supplies the
sensor with operating voltage�
> If the sensor is addressed via the software for parameter setting and set-up of
IO-Link sensors "LINERECORDER DEVICE"
the correct communication mode and starts the exchange of data�
If the sensor does not have a suitable communication protocol, no data is
exchanged� But the sensor continues to be supplied with operating voltage� This
enables operation for testing or demonstration purposes�
6 Technical data and scale drawing
Technical data and scale drawing at www�ifm�com�