IFM DTC600 Operating Instructions Manual Download

Page: 55 / 61

Object directory

Index

Subindex

Name (object)

Value

0x2480

0x00

Lock start of the ad-
dress (start of the
address range on
the ID tag to be
locked)

0x04

0x2481

0x00

Write length (length
of the memory range
on the ID tag to be
locked)

0x08

0x2482

0x00

ID tag lock trigger

0x01

9.2.8 Error codes during SDO transfer

SDO transfers are acknowledged transfers. If there is an error during transfer or
during actions caused by the transfer, an error is signalled after the SDO transfer.

SDO error code

Description

Possible cause

0x05030000

Toggle bit unchanged.

0x05040000

SDO protocol expired.

0x05040001

Client/server command
specifier not valid or un-
known.

0x05040002

Invalid block size (block
mode only).

0x05040003

Invalid sequence number
(block mode only).

0x05040004

CRC error (block mode on-
ly).

0x05040005

Out of memory.

0x06010000

Access to the object is not
supported.

0x06010001

Attempt to read a write only
object.

Summary of Contents for DTC600






























































Search results

Summary of Contents for DTC600

Reviews:

Related manuals for DTC600

Brands by name

Popular brands

IFM DTC600, Operating Instructions Manual

Search results

Summary of Contents for DTC600

Reviews:

Related manuals for DTC600

Brands by name

Popular brands