DSU100
IO-Link data memory
6
4 Installation
Information about available accessories at www.ifm.com
4.1 Mechanical design
Fig. 1: Device
4.2 Installation on tanks with mounting adapter
1
2
3
4
Fig. 2: Installing the device with mounting adapter
The mounting adapter is available as an accessory (article number E12153).
Installing the device with the mounting adapter:
u
Insert the top of the device (1) into the mounting adapter.
u
Press the bottom of the device (2) into the mounting adapter.
w
The device can be inserted into the mounting adapter from the top or the bottom.
u
Fasten the device on the mounting adapter with the screws supplied (3).
u
Install the mounting adapter on the tank with the screws supplied (4).
4.3 Installation without mounting adapter
Fig. 3: Installing the device without mounting adapter
Installing the device without mounting adapter:
u
Install the device at the mounting location with suitable screws or glue.
