IFM DSU100, Operating Instructions Manual

Page: 12 / 24

DSU100 IO-Link data memory
12
8.3 "Read UID” operating mode
In the „Read UID“ operating mode, the UID of the device is read and provided by the latter at the
process data input. The UID cannot be changed and deleted. The UID is individually assigned to each
device at the factory.
The "Read UID" operating mode is the default operating mode after the device is started.
Byte Process data output Process data input
0 Command value = 0x00 Command value = 0x00
1 Status Status
2 ignored UID 0
3 ignored UID 1
4 ignored UID 2
5 ignored UID 3
6 ignored UID 4
7 ignored UID 5
8 ignored UID 6
9 ignored UID 7
10 ignored 0x00
11 ignored 0x00
12 ignored 0x00
13 ignored 0x00
14 ignored 0x00
15 ignored 0x00
16 ignored 0x00
17 ignored 0x00
18 ignored 0x00
19 ignored 0x00
20 ignored 0x00
21 ignored 0x00
22 ignored 0x00
23 ignored 0x00
24 ignored 0x00
25 ignored 0x00
26 ignored 0x00
27 ignored 0x00
28 ignored 0x00
29 ignored 0x00
30 ignored 0x00
31 ignored Error value
8.4 "Auto-read data” operating mode
In the "Auto-read data" operating mode the data 0 to 27 represent the data in the memory area of the
device. The memory area is set by the parameters "Auto-Read/Write Address" and "Auto-Read/Write
Data Length".
For memory areas with a data length of < 28 bytes the data remaining in the process image is filled
with the value 0x00.