Installation instructions CANwireless CR3130/CR3131
16
7.6 Bluetooth configuration
For a Bluetooth bridge the slave configuration should be made first� For the slave
configuration the Bluetooth MAC address and the pin code of the master device
are required�
Configuration device 1 (master):
►
Deactivate "Wi-Fi" under "WLAN settings"�
►
Activate Bluetooth under "Bluetooth settings"�
►
Enter a device name under "Device name"�
►
Activate "Discoverable" and "Pairable"�
►
Set the parameter "Security mode Bluetooth 2�1" under "Security settings" to
"Disable"�
►
Activate "Allow Bluetooth 2�0 pairing"�
►
Enter a four-digit code under "Pin code"�
►
Deactivate "Automatic Bluetooth Connection"�
►
Activate "SPP Server"�
►
Transfer the configuration to device 1�
►
Take down the Bluetooth MAC address of the master device (can be found on
the housing)�
Configuration device 2 (slave):
►
Deactivate "Wi-Fi" under "WLAN settings"�
►
Activate Bluetooth under "Bluetooth settings"�
►
Enter a device name under "Device name"�
►
Activate "Discoverable" and "Pairable"�
►
Set the parameter "Security mode Bluetooth 2�1" under "Security settings" to
"Disable"�
►
Activate "Allow Bluetooth 2�0 pairing"�
►
Enter the four-digit code configured in device 1 under "Pin code"�
►
Activate "Automatic Bluetooth Connection"�
►
Enter the Bluetooth MAC address of the master device under "Bluetooth MAC
address"�
►
Deactivate "SPP Server"�
►
Transfer the configuration to device 2�