IIoT controller
AE3100
17
10 Settings
10.1 Updating the system software
New versions of the system software are available at:
u
Download new system software.
10.1.1 Updating the system software via IoT-Core Visualizer
The user can update the system software via the IoT-Core Visualizer.
Requirements:
ü
Device has been started.
ü
Laptop / PC connected with Ethernet port eth3.
u
Start web browser.
u
Go to the following URL:
http://<ip_eth3>:8090/browse
(e.g.
http://
192.168.83.247:8090/browse
)
w
User interface of the ifm IoT Core Visualizer appears.
u
Select [Update] menu.
w
Menu page shows information about the current firmware version.
u
In the [Firmware] area: Click on [Load software file].
w
File explorer appears.
u
Select new firmware version and click [Open].
u
In the [Firmware] area: Click on [Update].
w
The firmware of the device is updated.
w
Area shows the progress of the update process.
w
After successful update: The device starts automatically.
10.1.2 Updating the system software via USB port
Requirements:
ü
The device is switched off.
u
Copy the system software file (*.swu) to the root directory of the USB memory.
u
Ensure that only one swu file is stored in the root directory of the USB memory.
