Remote I/O module 16 DI
AL4142
39
Name
Description
Value range
Access
[voltage_us]
current voltage value of the device supply
US (value in millivolts)
e.g. 25236: 25236 mV
ro
1
[current_us]
current value of the device supply US
(value in milliamps)
e.g. 82: 82 mA
ro
1
[supervisionstatus_us]
Status of the device supply US
• OK: No error
• Fault: Error
ro
1
[uptime]
Time since the last start of the device
(value in minutes)
• 0x0000: 0 min
…
• 0xFFFF: 65535 min
ro
1
1
read only
Requirements:
ü
IoT Core Visualizer has been launched.
ü
The [Processdata] menu is active.
u
Select the submenu [Processdatamaster].
w
Menu page shows status and diagnostic information.
9.2.5 Update firmware
The [Update] menu page allows you to update the firmware of the device:
Requirements:
ü
IoT Core Visualizer has been launched.
ü
New firmware has been downloaded:
u
Select the [Update] menu.
w
Menu page shows information about the current firmware version.
u
Click on [Load software file] and select a new firmware file (*.bin).
u
Click on [Update] to start the update process.
w
The firmware of the device is updated.
w
Progress of the update process is displayed.
w
After successful update: The device reboots automatically.
