IFM AL1352 Operating Instructions Manual Download

Page: 23 / 84

IO-Link Master with IoT Interface DataLine 8 Ports IP 65 / IP 66 / IP 67

8.1

Read device and diagnostic information

52240

The AL1352 has an integrated web server. The component provides device and diagnostic information
of the IO-Link master and the connected IO-Link devices.
►

Connect laptop/PC and AL1352 via the Ethernet interface.

►

Start web browser.

►

Enter the IP address of the AL1352 into the address field of the browser and confirm with [ENTER].

Web browser shows the web interface of the device.

The page shows the following data:



Table with connected IO-Link devices

Name

Description

[Port]

Number of the IO-Link port

[Mode]

Operating mode of the IO-Link port

[Comm. Mode]

Baud rate of the IO-Link port

[MasterCycleTime]

Cycle time

[Vendor ID]

IO-Link ID of the manufacturer of the IO-Link device

[Device ID]

IO-Link ID of the IO-Link device

[Name]

Article number of the IO-Link device



For ifm articles: This article number is stored along with a link to the product page on
the ifm website.

[Serial]

Serial number of the IO-Link device



Diagnostic information of the device

Name

Description

[SW-Version]

[Current]

Current (in mA)

[Voltage]

Voltage (in mV)

[Short Circuit]

Number of detected short circuits

[Overload]

Number of overvoltages

[Undervoltage]

Number of undervoltages

[Temperature]

Device temperature (in °C)



Version information of the installed firmware components

Name

Description

[Firmware]

Firmware version

[Container]

Version of the firmware container

[Bootloader Version]

Version of the bootloader

[Fieldbus Firmware]

Version of the IoT core firmware

Summary of Contents for AL1352





















































































Search results

Summary of Contents for AL1352

Reviews:

Related manuals for AL1352

Brands by name

Popular brands

IFM AL1352, Operating Instructions Manual

Search results

Summary of Contents for AL1352

Reviews:

Related manuals for AL1352

Brands by name

Popular brands