IFM AL1340 Operating Instructions Manual Download Page 37

Page: 37 / 129

IO-Link Master with Modbus TCP Interface DataLine 4 Ports IP 65 / IP 66 / IP 67

9.1.15

Configure IO-Link devices

33856

To configure the IO-Link devices connected to the device with the LR DEVICE parameter setting
software:

Requirements:

IO-Link master is correctly installed and connected to the LR DEVICE parameter setting software.

The IO-Link device is correctly connected to the AL1340.

Operating mode of the IO-Link port is "IO-Link" (→

IO-Link ports: Configure operating mode

(→ S.

)).

IoT has write access rights to the IO-Link master (→

IoT: Configure access rights

(→ S.

)).

1 Select IO-Link master

►

Start LR DEVICE.

►

Update IODD file library

OR:
Import IODD file of the IO-Link device manually.

►

Scan network for devices.

LR DEVICE detects IO-Link master.

2 Add IO-Link device

►

Under [ONLINE]: Click on the required IO-Link master.

LR DEVICE automatically detects the IO-Link devices connected to the IO-Link master (e.g. ifm sensor KG5065).

3 Configure IO-Link device

►

Mouse click on the port to which the IO-Link device is connected.

LR DEVICE reads and shows the current parameter values of the IO-Link device.

►

Configure IO-Link device.

Information about the available parameters of the IO-Link device:

→ IO Device Description

(IODD) of the IO-Link device

►

Save the changed configuration on the IO-Link device.

Summary of Contents for AL1340


































































































































Search results

Summary of Contents for AL1340

Reviews:

Related manuals for AL1340

Brands by name

Popular brands

IFM AL1340, Operating Instructions Manual

Search results

Summary of Contents for AL1340

Reviews:

Related manuals for AL1340

Brands by name

Popular brands